Please note: After a recent Tesla software update, the ability to manually initiate the TPMS Reset has been removed from many vehicles. Instead the vehicle should determine that a change has occurred within the first 20 minutes of driving after a new sensor has been fitted, at which point the driver will be displayed with the option to select the correct wheel size.

Because the message sometimes now takes a long time to display, or in some cases does not display at all for the first few times the vehicle is driven after a wheel, tyre, or sensor change, a TPMS reset may not occur until a significant amount of driving has occurred. Additionally, if the vehicle is not stationary for at least 20 minutes between drives then the sensors will not be able to provide their locations, which will further delay the process.

Other factors that may delay the TPMS reset include transporting the original sensors (or wheels with the original sensors mounted) inside the vehicle, starting the TPMS Reset from the same location that the original sensors were removed, and driving the Tesla in close proximity to other Tesla vehicles.

Vehicle TPMS Information

Make:Tesla
Model:Model X
Model Code:5YJX
Date of Manufacture:September 2015 - September 2021
OE Sensor Manufacturer:CONTINENTAL
OE Sensor Number:

103460200C

The following sensors are all compatible with: Tesla Model X 2015-2021.

Direct Replacement Sensors

72-20-838

VDO TG1C Clamp-In Sensor

VDO TG1C Tesla OE replacement sensor.

Barcode: 5055563005042

Comparative Part Numbers: 4081, 2168, 103460200A, S180052068, A2C1026160080, 107481200B, 103460200C, S180052068Z, 103460200B,

72-20-995

OE-R Clamp-In Sensor S139

Aftermarket OE replacement sensor. Please note a scan tool is required to gather sensor information – including the Sensor ID wh... (more)

Barcode: 5055563006582

Comparative Part Numbers: HTS-A69BM-S139, 5628739,

72-22-047

Schrader Pre-Programmed EZ Delta Clamp-In Sensor

Comparative Part Numbers: T2200-GO,

AWA Handel Configurable and Programmable Sensors

72-21-945

T-Pro Hybrid 3.5 3200 Clamp-In Sensor

Configurable & Programmable Universal Sensors Configurable: configure in 1-3 seconds, as protocols covering a high percentage of ... (more)

Barcode: 5055563028898

Comparative Part Numbers: HTS-A68BM,

72-21-946

T-Pro Hybrid 3.5 3200 Snap-In Sensor

Configurable & Programmable Universal Sensors Configurable: configure in 1-3 seconds, as protocols covering a high percentage of ... (more)

Barcode: 5055563028911

Comparative Part Numbers: HTS-A68BA,

72-21-947

T-Pro Hybrid 3.5 3200 Black Clamp-In Sensor

Configurable & Programmable Universal Sensors Configurable: configure in 1-3 seconds, as protocols covering a high percentage of ... (more)

Barcode: 5055563028935

Comparative Part Numbers: HTS-A68BN,

72-21-951

T-Pro Hybrid 3.5 3200 Graphite Clamp-In Sensor

Configurable & Programmable Universal Sensors Configurable: configure in 1-3 seconds, as protocols covering a high percentage of ... (more)

Barcode: 5055563025491

Comparative Part Numbers: HTS-A68BP,

72-21-953

T-Pro Hybrid NFC HTS-3300 Silver Clamp-in Sensor

The NFC-Enabled Universal Sensor What Sets this Sensor Apart? Users can configure and program this sensor with their smartphones.*... (more)

Barcode: 5055563029413

Comparative Part Numbers: HTS-A71BM-TEC,

72-21-954

T-Pro Hybrid NFC HTS-3300 Snap-in Sensor

The NFC-Enabled Universal Sensor What Sets this Sensor Apart? Users can configure and program this sensor with their smartphones.*... (more)

Barcode: 5055563029437

Comparative Part Numbers: HTS-A71BA-TEC,

72-21-955

T-Pro Hybrid NFC HTS-3300 Black Clamp-in Sensor

The NFC-Enabled Universal Sensor What Sets this Sensor Apart? Users can configure and program this sensor with their smartphones.*... (more)

Barcode: 5055563029451

Comparative Part Numbers: HTS-A71BN-TEC,

72-21-956

T-Pro Hybrid NFC HTS-3300 Graphite Clamp-in Sensor

The NFC-Enabled Universal Sensor What Sets this Sensor Apart? Users can configure and program this sensor with their smartphones.*... (more)

Barcode: 5055563029475

Comparative Part Numbers: HTS-A71BP-TEC,

72-21-969

Hybrid Lite Sensor HTS-3600 Silver Clamp-In

The lite version of the Hybrid 3.5 offers the same vehicle coverage but at a lower cost. The difference between the lite and stand... (more)

Barcode: 6924478990530

Comparative Part Numbers: HTS-A88CM,

72-21-982

Hybrid Lite Sensor HTS-3600 Snap-In

The lite version of the Hybrid 3.5 offers the same vehicle coverage but at a lower cost. The difference between the lite and stand... (more)

Barcode: 6924478990554

Comparative Part Numbers: HTS-A88CA,

72-21-983

Hybrid Lite Sensor HTS-3600 Black Clamp-In

The lite version of the Hybrid 3.5 offers the same vehicle coverage but at a lower cost. The difference between the lite and stand... (more)

Barcode: 6924478990547

Comparative Part Numbers: HTS-A88CN,

72-21-991

Hybrid Lite Sensor HTS-3600 Graphite Clamp-In

The lite version of the Hybrid 3.5 offers the same vehicle coverage but at a lower cost. The difference between the lite and stand... (more)

Barcode: 6924478990561

Comparative Part Numbers: HTS-A88CP,

Other Compatible Sensors

72-20-845

Schrader Delta EZ 2.0 Clamp-In Sensor - EU 433Mhz

Schrader programmable EZ-Sensor 2.0 433Mhz EU. Requires a TPMS diagnostic tool to program the sensor for a particular vehicle.... (more)

Barcode: 5055563005523

Comparative Part Numbers: 2200,

72-21-958

Intellisens Clamp-In Sensor

72-21-936

Intellisens Snap-In Sensor

HUF configurable Intellisens 4041 sensor. Requires a TPMS diagnostic tool to configure the sensor for a particular vehicle.

72-21-959

Intellisens Snap-In Sensor

72-20-086

Alligator Sens.It Snap-In Sensor 433MHz

Alligator programmable Sens.It sensor 433Mhz. Requires a TPMS diagnostic tool to program the sensor for a particular vehicle.

Barcode: 5055563003352

Comparative Part Numbers: 590918,

72-20-085

Alligator Sens.It Clamp-In Sensor 433MHz

Alligator programmable Sens.It sensor 433Mhz. Requires a TPMS diagnostic tool to program the sensor for a particular vehicle.

Barcode: 5055563003345

Comparative Part Numbers: 590914,

Service parts for the VDO TG1C Clamp-In style sensor:

OE Parts

72-20-106

Box Of 10 Clamp-In Valves for VDO TG1C

A box of 10 Schrader clamp-in valves, with each including: 1 Valve Stem and 1 Valve Cap . These valves are suitable for use with... (more)

Barcode: 5055563001525

Comparative Part Numbers: 8002, 43171-68,

72-20-216

Service Kit for VDO TG1C

A single VDO service kit, which includes: 1 Nut, 1 Rubber Grommet, 1 Metal Washer, 1 Valve Cap and 1 Valve Core. This service ki... (more)

Barcode: 5055563000726

Comparative Part Numbers: 66070-KU, VDO84520A004520A618000A;,

AM Parts

72-20-442

Box Of 10 Replacement Clamp-In Valves for VDO TG1C

A box of 10 clamp-in valves, with each including: 1 Valve Stem and 1 Valve Cap. These valves are suitable for use with VDO TG1C ... (more)

Barcode: 5055563004854

Comparative Part Numbers: 6-231, 5628475, 8002,

72-20-482

Box Of 10 Replacement Clamp-In Valves for VDO TG1C

A box of 10 clamp-in valves, with each including: 1 Valve Stem, 1 Nut, 1 Rubber Grommet, 1 Metal Washer, 1 Valve Cap and 1 Valve C... (more)

Barcode: 5055563028850

Comparative Part Numbers: 6-231C, 5628580, 21117, 5628475, VS-70, 591326,

72-20-513

Box Of 10 Service Kits for VDO TG1C

A box of 10 service kits, with each including: 1 Nut, 1 Rubber Grommet, 1 Metal Washer, 1 Valve Cap and 1 Valve Core. This servi... (more)

Barcode: 5055563001839

Comparative Part Numbers: 6-138, 5628447, 21111, TPMSRFAB, 7020K, 5628421, 591315, 92-3312,

You must be logged in to view relearn procedures.

Every effort is made to ensure that this page is as accurate as possible, however the information cannot be guaranteed.