Please note: After a recent Tesla software update, the ability to manually initiate the TPMS Reset has been removed from many vehicles. Instead the vehicle should determine that a change has occurred within the first 20 minutes of driving after a new sensor has been fitted, at which point the driver will be displayed with the option to select the correct wheel size.
Because the message sometimes now takes a long time to display, or in some cases does not display at all for the first few times the vehicle is driven after a wheel, tyre, or sensor change, a TPMS reset may not occur until a significant amount of driving has occurred. Additionally, if the vehicle is not stationary for at least 20 minutes between drives then the sensors will not be able to provide their locations, which will further delay the process.
Other factors that may delay the TPMS reset include transporting the original sensors (or wheels with the original sensors mounted) inside the vehicle, starting the TPMS Reset from the same location that the original sensors were removed, and driving the Tesla in close proximity to other Tesla vehicles.
Make: | Tesla |
---|---|
Model: | Model 3 |
Model Code: | 5YJ3 |
Date of Manufacture: | July 2018 - October 2020 |
OE Sensor Manufacturer: | CONTINENTAL |
OE Sensor Number: | 103460200C |
The following sensors are all compatible with: Tesla Model 3 2018-2020.
72-20-995
OE-R Clamp-In Sensor S139
Aftermarket OE replacement sensor. Please note a scan tool is required to gather sensor information – including the Sensor ID wh... (more)
72-21-945
T-Pro Hybrid 3.5 3200 Clamp-In Sensor
Configurable & Programmable Universal Sensors Configurable: configure in 1-3 seconds, as protocols covering a high percentage of ... (more)
72-21-946
T-Pro Hybrid 3.5 3200 Snap-In Sensor
Configurable & Programmable Universal Sensors Configurable: configure in 1-3 seconds, as protocols covering a high percentage of ... (more)
72-21-947
T-Pro Hybrid 3.5 3200 Black Clamp-In Sensor
Configurable & Programmable Universal Sensors Configurable: configure in 1-3 seconds, as protocols covering a high percentage of ... (more)
72-21-951
T-Pro Hybrid 3.5 3200 Graphite Clamp-In Sensor
Configurable & Programmable Universal Sensors Configurable: configure in 1-3 seconds, as protocols covering a high percentage of ... (more)
72-21-953
T-Pro Hybrid NFC HTS-3300 Silver Clamp-in Sensor
The NFC-Enabled Universal Sensor What Sets this Sensor Apart? Users can configure and program this sensor with their smartphones.*... (more)
72-21-954
T-Pro Hybrid NFC HTS-3300 Snap-in Sensor
The NFC-Enabled Universal Sensor What Sets this Sensor Apart? Users can configure and program this sensor with their smartphones.*... (more)
72-21-955
T-Pro Hybrid NFC HTS-3300 Black Clamp-in Sensor
The NFC-Enabled Universal Sensor What Sets this Sensor Apart? Users can configure and program this sensor with their smartphones.*... (more)
72-21-956
T-Pro Hybrid NFC HTS-3300 Graphite Clamp-in Sensor
The NFC-Enabled Universal Sensor What Sets this Sensor Apart? Users can configure and program this sensor with their smartphones.*... (more)
72-21-969
Hybrid Lite Sensor HTS-3600 Silver Clamp-In
The lite version of the Hybrid 3.5 offers the same vehicle coverage but at a lower cost. The difference between the lite and stand... (more)
72-21-982
Hybrid Lite Sensor HTS-3600 Snap-In
The lite version of the Hybrid 3.5 offers the same vehicle coverage but at a lower cost. The difference between the lite and stand... (more)
72-21-983
Hybrid Lite Sensor HTS-3600 Black Clamp-In
The lite version of the Hybrid 3.5 offers the same vehicle coverage but at a lower cost. The difference between the lite and stand... (more)
72-21-991
Hybrid Lite Sensor HTS-3600 Graphite Clamp-In
The lite version of the Hybrid 3.5 offers the same vehicle coverage but at a lower cost. The difference between the lite and stand... (more)
72-20-845
Schrader Delta EZ 2.0 Clamp-In Sensor - EU 433Mhz
Schrader programmable EZ-Sensor 2.0 433Mhz EU. Requires a TPMS diagnostic tool to program the sensor for a particular vehicle.... (more)
72-20-106
Box Of 10 Clamp-In Valves for VDO TG1C
A box of 10 Schrader clamp-in valves, with each including: 1 Valve Stem and 1 Valve Cap . These valves are suitable for use with... (more)
72-20-216
Service Kit for VDO TG1C
A single VDO service kit, which includes: 1 Nut, 1 Rubber Grommet, 1 Metal Washer, 1 Valve Cap and 1 Valve Core. This service ki... (more)
72-20-442
Box Of 10 Replacement Clamp-In Valves for VDO TG1C
A box of 10 clamp-in valves, with each including: 1 Valve Stem and 1 Valve Cap. These valves are suitable for use with VDO TG1C ... (more)
72-20-482
Box Of 10 Replacement Clamp-In Valves for VDO TG1C
A box of 10 clamp-in valves, with each including: 1 Valve Stem, 1 Nut, 1 Rubber Grommet, 1 Metal Washer, 1 Valve Cap and 1 Valve C... (more)
72-20-513
Box Of 10 Service Kits for VDO TG1C
A box of 10 service kits, with each including: 1 Nut, 1 Rubber Grommet, 1 Metal Washer, 1 Valve Cap and 1 Valve Core. This servi... (more)
You must be logged in to view relearn procedures.
Every effort is made to ensure that this page is as accurate as possible, however the information cannot be guaranteed.