Please note: Rivian created a battery saving technology to save TPMS sensors running out of battery. Which means the time can vary on how long it takes the new TPMS sensors to connect after a wheel change or sensor change. We recomend to drive the car for over 20 minutes, at highway speeds if possible. This 'typically' works. However, sometimes it can take a couple of driving cycles to trigger the connection process.
Make: | Rivian |
---|---|
Model: | R1S |
Model Code: | A1C |
Date of Manufacture: | December 2022 - December 2025 |
OE Sensor Manufacturer: | HUF |
OE Sensor Number: | PT00000742 |
The following sensors are all compatible with: Rivian R1S 2022-2025.
72-22-905
OE-R Clamp-In Sensor S520
Aftermarket OE replacement sensor. Please note a scan tool is required to gather sensor information – including the Sensor ID wh... (more)
72-21-945
T-Pro Hybrid 3.5 3200 Clamp-In Sensor
Configurable & Programmable Universal Sensors Configurable: configure in 1-3 seconds, as protocols covering a high percentage of ... (more)
72-21-946
T-Pro Hybrid 3.5 3200 Snap-In Sensor
Configurable & Programmable Universal Sensors Configurable: configure in 1-3 seconds, as protocols covering a high percentage of ... (more)
72-21-947
T-Pro Hybrid 3.5 3200 Black Clamp-In Sensor
Configurable & Programmable Universal Sensors Configurable: configure in 1-3 seconds, as protocols covering a high percentage of ... (more)
72-21-951
T-Pro Hybrid 3.5 3200 Graphite Clamp-In Sensor
Configurable & Programmable Universal Sensors Configurable: configure in 1-3 seconds, as protocols covering a high percentage of ... (more)
72-21-953
T-Pro Hybrid NFC HTS-3300 Silver Clamp-in Sensor
The NFC-Enabled Universal Sensor What Sets this Sensor Apart? Users can configure and program this sensor with their smartphones.*... (more)
72-21-954
T-Pro Hybrid NFC HTS-3300 Snap-in Sensor
The NFC-Enabled Universal Sensor What Sets this Sensor Apart? Users can configure and program this sensor with their smartphones.*... (more)
72-21-955
T-Pro Hybrid NFC HTS-3300 Black Clamp-in Sensor
The NFC-Enabled Universal Sensor What Sets this Sensor Apart? Users can configure and program this sensor with their smartphones.*... (more)
72-21-956
T-Pro Hybrid NFC HTS-3300 Graphite Clamp-in Sensor
The NFC-Enabled Universal Sensor What Sets this Sensor Apart? Users can configure and program this sensor with their smartphones.*... (more)
72-21-969
Hybrid Lite Sensor HTS-3600 Silver Clamp-In
The lite version of the Hybrid 3.5 offers the same vehicle coverage but at a lower cost. The difference between the lite and stand... (more)
72-21-982
Hybrid Lite Sensor HTS-3600 Snap-In
The lite version of the Hybrid 3.5 offers the same vehicle coverage but at a lower cost. The difference between the lite and stand... (more)
72-21-983
Hybrid Lite Sensor HTS-3600 Black Clamp-In
The lite version of the Hybrid 3.5 offers the same vehicle coverage but at a lower cost. The difference between the lite and stand... (more)
72-21-991
Hybrid Lite Sensor HTS-3600 Graphite Clamp-In
The lite version of the Hybrid 3.5 offers the same vehicle coverage but at a lower cost. The difference between the lite and stand... (more)
72-20-845
Schrader Delta EZ 2.0 Clamp-In Sensor - EU 433Mhz
Schrader programmable EZ-Sensor 2.0 433Mhz EU. Requires a TPMS diagnostic tool to program the sensor for a particular vehicle.... (more)
72-20-127
Snap-In Valve for Intellisens
A single HUF snap-in valve. This valve is suitable for use with HUF snap-in Intellisens sensors. Snap-in valve which includes: 1... (more)
You must be logged in to view relearn procedures.
Every effort is made to ensure that this page is as accurate as possible, however the information cannot be guaranteed.